b'the effective stress-strain curves atmechanical testing. Another version (a) room temperature, (b) 300C andof the ring pull test setup was quali-(c) 600C. Tests indicate that the Crfied in the hot cell at INL. The grip coating increases high temperaturewas made of 17-4 PH Stainless Steel, strength and has less of an impact onwith interchangeable mandrels and strength at room temperature. design features to enhance remote The second goal focused on in-cellhandling and was used with the implementation of hoop directionremote load frame in the hot cell as shown in Figure 3(a). Single-gauge Figure 2. Effective stress-strain curves for ring pull testing at (a) room temperature (b) 300C and (c) 600C. The numbers after the sample names indicates the specific ring testedFigure 3. (a) INL version of the ring pull test, placed in the hot cell and compatible with clamshell furnace (not pictured). (b) A single-gauge cladding ring after testing to failure. (c) Stress-strain curves of uncoated and cold-spray coated cladding at room and elevated temperature56 2023|AFC ACCOMPLISHMENTS'