b'Figure 3. Plot showing a signal for 234U with optimized LA-ICPMS airflow parameters. 234U has an abundance of 0.005%, so seeing signal means trace analysis is possible with LA-ICPMS. The data shows that around 1 L/min of carrier Ar flow is optimal for high sensitivity signalsmaterial in the future. Thirdly, weLaser Ablation- Inductively Coupled are tasked to develop a method toPlasma - Mass Spec (LA-ICP-MS) set remove laser processed samplesup and the light-induced breakdown for further evaluation. We havespectroscopy setup to compare the designed a lift out device and devel- data and verify that the components oped a methodology to perform awere working correctly as well as lift out procedure to quickly extractdetect Kr from the surrogate rod laser processed samples. Finally,post laser ablation.we must purchase and install an ICP MS system at UCB to fit within the current infrastructure. We were able to obtain a mass spec at UCB for use in the FLAME-CAMP program and collected initial mass spectrometry data from a fuel pellet. The mass spec has been installed and is functional at UCB. We were able to successfully get spectra and isotope data for SS304 with both the 2023|AFC ACCOMPLISHMENTS 173'