b'pressurized water reactor conditionsidentifying clear chemistry impactsFigure 1. Scanning transmission were chosen as an initial study toon the corrosion thickness of eachelectron microscopy energy verify oxide formation kinetics,alloy. Low Cr-content FeCrAl alloysdispersion x-ray elemental mapping and elemental linescan through the phase stabilities, and microstructuralshowed formation of a continuouscorrosion layer of C36M4 after 500 evolution of layered oxide systems.and dense Cr/Al mixed oxide with Fehours of exposure to 330C and 15.3 Oxidation studies in pressurized wateroxide nodules on the outer surfacesMPa with hydrogen water chemistryat 330C and 15.3 MPa have beenafter 500h of exposure. This was performed up to 1500h of exposure,verified with energy dispersive 2023|AFC ACCOMPLISHMENTS 51'