b'the fuel in comparison to standardTest Reactor (ATR), (2) the poolside zirconium rods. Southern Nuclearsinspection at the Hatch Unit 1 plant John Williams said that initial inspec- in Georgia in February 2020 (which tions have confirmed that the fuelwill continue with postirradiation performed as expected and that theyexamination (PIE) at ORNL), and (3) anticipate leveraging this successthe newest commercial installation and data with their fuel vendors intointo Clinton Unit 1 plant in Illinois in the continued development of thisOctober 2019.innovative technology. John WilliamsReferences:also said, We will continue to pursue[1.] R. B. Rebak Elsevier Book Acci-solutions like advanced fuel thatdent Tolerant Materials forFigure 2. Clinton Unit#1ATF-LTAenhance the performance and reli- Light Water Reactor Fuels Installation October 2019. ability of our operating plants andhttps://www.elsevier.com/ensure the safety and health of ourbooks/accident-tolerant-materi-customers and our employees. ORNLals-for-light-water-reactor-fuels/will conduct further evaluations of therebak/978-0-12-817503-3lead test rods material and coating properties. The data obtained from[2.] R. B. Rebak, L. Yin, P. L. Andresen, this analysis will be used by SouthernResistance of ferritic FeCrAl Nuclear and fuel vendor GNF to guidealloys to stress corrosion crack-future development of ATF technolo- ing for light water reactor fuel gies and provide information to thecladding applications, Corro-Nuclear Regulatory Commissionsion Journal, NACE International, (NRC) licensing review process. Thehttps://doi.org/10.5006/3632.industry is pursuing the licensing and[3.] R. V. Umretiya, B. Elward, D. Lee, full commercial deployment of ATF byM. Anderson, R. B. Rebak, J. V. the mid-2020s. Rojas, Mechanical and chemi-The technical goals for the currentcal properties of PVD and cold FY2020 period were, (a) to advancespray Cr-coatings on Zircaloy-4, on rod manufacturing procedures bothJournal of Nuclear Materials, Vol. for ARMOR coated and monolithic541, https://doi.org/10.1016/j.IronClad cladding, and (b) to makejnucmat.2020.152420progress on obtaining irradiation[4.] S. S. Raiman, K. G. Field, R. B. data for the ATF concepts. Both goalsRebak, Y. Yamamoto, K. A. Ter-were highly successful since it wasrani, Hydrothermal corrosion of demonstrated that standard industrial2nd generation FeCrAl alloys for equipment could be used for fabrica- accident tolerant fuel cladding, tion of advanced concepts rods, and GEJournal or nuclear materials, Vol. is continuing to explore the irradia- 536, https://doi.org/10.1016/j.tion resistance of the ATF conceptsjnucmat.2020.152221.at three sites simultaneously; (1) The ATF-2 program at the INL Advanced 32 2020|AFC ACCOMPLISHMENTS'